|
Serving Massachusetts, New Hampshire, Connecticut, New England, National & International Clients
|
 |
 |
 |
 |
Military Specification Fluid Cross-Reference
Select the Military Specification below to view specifics. |
|
|
| AMS 7270 |
| Drawing Number |
AN 123951 through AN 124050 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels |
| Recommended Temperature Range |
-40 to 302 °F
(-40 to 150 °C) |
| Elastomer |
Nitrile |
| Compound |
4456-70 |
| Comments |
For use in aircraft fuels, both piston (gasoline) and jet (jet fuels) engines. |
| MIL-R-25988 Class 1, Grade 70 |
| Drawing Number |
M25988/1 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-70 to 392 °F
(-57 to 200 °C) |
| Elastomer |
Fluorosilicone |
| Compound |
1903-70 |
| Comments |
Blue color as required by MIL spec. Not recommended for high pressure dynamic applications. |
| MIL-R-25988 Class 3, Grade 75 |
| Drawing Number |
M25988/2 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-70 to 437 °F
(-57 to 225 °C) |
| Elastomer |
Fluorosilicone |
| Compound |
1904-75 |
| Comments |
Blue color as required by MIL spec. Higher modulus and higher temperature resistance than 1903-70. |
| MIL-R-25988 Class 1, Grade 60 |
| Drawing Number |
M25988/3 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-70 to 392 °F
(-57 to 200 °C) |
| Elastomer |
Fluorosilicone |
| Compound |
1902-60 |
| Comments |
Blue color as required by MIL spec. Lower durometer than 1903-70. For low pressure applications. |
| MIL-R-25988 Class 1, Grade 80 |
| Drawing Number |
M25988/4 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-70 to 392 °F
(-57 to 200 °C) |
| Elastomer |
Fluorosilicone |
| Compound |
1905-80 |
| Comments |
Blue color as required by MIL spec. Higher durometer than 1903-70. |
| MIL-R-83248 Class 1 |
| Drawing Number |
M83248/1 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-20 to 400 °F
(-29 to 204 °C) |
| Elastomer |
Fluorocarbon |
| Compound |
9009-75 |
| Comments |
Excellent resistance to compression set. |
| MIL-R-83248 Class 2 |
| Drawing Number |
M83248/2 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-20 to 400 °F
(-29 to 204 °C) |
| Elastomer |
Fluorocarbon |
| Compound |
9009-90 |
| Comments |
Higher durometer than 9009-75. |
| MIL-P-83461 |
| Drawing Number |
M83461/1A |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
MIL-H-5606 |
| Recommended Temperature Range |
-65 to 275 °F
(-54 to 135 °C) |
| Elastomer |
Nitrile |
| Compound |
4367-70 |
| Comments |
Better dynamic performance and longer service life at 257°F than 4067-70. |
| AMS 7271 |
| Drawing Number |
AS3578 |
| Sealing |
Used for static sealing. Not recommended for high pressure dynamic applications. |
| Fluid |
Aircraft fuels |
| Recommended Temperature Range |
-58 to 257 °F
(-50 to 125 °C) |
| Elastomer |
Nitrile |
| Compound |
4465-65 |
| Comments |
Tube fitting sizes only. |
| AMS 3304 |
| Drawing Number |
AS3582 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Dry heat and petroleum based lube oils |
| Recommended Temperature Range |
-85 to 400 °F
(-65 to 204 °C) |
| Elastomer |
Silicone |
| Compound |
1235-70 |
| Comments |
Not recommended for high pressure dynamic applications. |
| AMS 7267 |
| Drawing Number |
MS9385 - Tube fitting sizes only.
MS9386 - All sizes except the tube fitting sizes. |
| Sealing |
MS9385 - static sealing only.
MS9386 - both static and dynamic sealing. |
| Fluid |
Dry heat and petroleum based lube oils |
| Recommended Temperature Range |
-85 to 500 °F
(-65 to 260 °C) |
| Elastomer |
Silicone |
| Compound |
1373-70 |
| AMS 7278 |
| Drawing Number |
MS9387 |
| Sealing |
Used for static sealing only. |
| Fluid |
Aircraft fuels and lubricants |
| Recommended Temperature Range |
-20 to 400 °F
(-29 to 204 °C) |
| Elastomer |
Fluorocarbon |
| Compound |
9009-75 |
| Comments |
This drawing cover tube fitting sizes only. |
| MIL-P-25732 |
| Drawing Number |
MS28775 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
MIL-H-5606 |
| Recommended Temperature Range |
-65 to 275 °F
(-54 to 135 °C) |
| Elastomer |
Nitrile |
| Compound |
4067-70 |
| Comments |
MIL-H-5606 is the petroleum base hydraulic fluid used in military aircraft (inactive for new designs; see M 83461/1A). |
| AMS 3209 |
| Drawing Number |
MS28900 |
| Sealing |
Used for static sealing only. |
| Fluid |
Ozone |
| Recommended Temperature Range |
-40 to 212 °F
(-40 to 100 °C) |
| Elastomer |
Neoprene |
| Compound |
3110-70 |
| Comments |
For weather resistant seals.
(Non-standard sizes) |
| MIL-P-5315 |
| Drawing Number |
MS29512 - Tube fitting sizes only.
MS29513 - All sizes except the tube fitting sizes. |
| Sealing |
MS29512 - static sealing only.
MS29513 - both static and dynamic sealing. |
| Fluid |
Aircraft fuels |
| Recommended Temperature Range |
-65 to 158 °F
(-54 to 70 °C) |
| Elastomer |
Nitrile |
| Compound |
0457-60 |
| Comments |
|
| MIL-R-7362, Type 1 |
| Drawing Number |
NAS617 |
| Sealing |
Used for both static and dynamic sealing. |
| Fluid |
Synthetic diester jet engine lubricants (MIL-L-7808) |
| Recommended Temperature Range |
-65 to 257 °F
(-54 to 125 °C) |
| Elastomer |
Nitrile |
| Compound |
4043-70 |
| Comments |
This drawing cover tube fitting sizes only. |
| NAS 1613, REV2 or REV4 |
| Drawing Number |
NAS1611 - All sizes except the tube fitting sizes.
NAS1612 - Tube fitting sizes only. |
| Sealing |
NAS1611 - both static and dynamic sealing.
NAS1612 - static sealing only. |
| Fluid |
Phosphate ester hydraulic fluid (Skydrol) |
| Recommended Temperature Range |
-65 to 250 °F
(-54 to 121 °C) |
| Elastomer |
Ethylene Propylene |
| Comments |
These drawings are inactive for new design. |
| A-A-59588 |
| Drawing Numbers |
MS26577, MS27290, MS27595 |
| Sealing |
Static sealing only. |
| Fluid |
Ozone, FDA, Fungus Resistant |
| Recommended Temperature Range |
-100 to 425 °F
(-73 to 219 °C) |
| Elastomer |
Silicone Rubber |
| Compound |
S0604-70 |
| Comments |
General purpose low and high temperature resistant - Low compression set. |
|
   |
|
 |
 |
 |
 |
|
|
